PROFIBUS DP / FMS / FIP 150 Ohm - HF | JOB_T2003657

Product information "PROFIBUS DP / FMS / FIP 150 Ohm - HF"

Special features

low adhesion
largely resistant to grease, coolant fluids and lubricants
oil-resistant: PUR & PVC acc.to DIN EN 60811-2-1 (PVC only mineral oil)
UV-resistant
optimized EMC compliant shielding
max. cable lengths for a bus segment acc.to PI at stated transmission rate:
PROFIBUS DP: 93,75kbit/s-max.1,2km | 187,5kbit/s-max.1km | 0,5Mbit/s-max.400m
1,5 Mbit/s-max.200m | 12,0 Mbit/s-max.100m
FIP : 2,5 Mbit/s-max. 200m

Remarks

Conductor material:	Bare copper strand
Conductor class:	Ø 0,64L & 0,34 mm²: 19-wired; 1,0 mm²: fine wired acc. to IEC 60228 cl. 6
Core insulation:	BUS: foamed PE/PP; supply cores: Polyolefin
Core identification:	BUS: gn, rd; supply cores: bk, bu, gnye (1,0mm²) \| bk with numerals (1,5mm²)
Stranding:	BUScores stranded to a pair
Shield:	Alu-lam. polyester foil, metal side outside, coverage 100% under copper braid tinned
Overall stranding:	HYBRID: screened BUSelem. a. supply cores stranded
Outer sheath:	PVC resp. PUR
Outer sheath construction:	Violet RAL 4001 (VT) or petrol (PT)
Rated voltage:	BUScores: 250 V (not for high voltage purposes); supply cores: 500 V
Loop resistance:	Max. 133,0 Ω/km-0,64L & 0,8L, max. 39,0 Ω/km-1 mm², max. 26,6 Ω/km-1,5 mm²
Capacity:	Nom. 30 nF/km
Characteristic impedance:	150 +/- 15 Ω
Min. bending radius fixed:	5 x d
Min. bending radius moved:	7,5 x d < 3mTL* \| 15 x d ≥ 3mTL*, FESTOON: 10 x d
Operat. temp. fixed min/max:	-40 °C / +80 °C
Operat. temp. moved min/max:	PVC: -10 °C / +70 °C; PUR: -30 °C/ +70 °C
Halogen free:	Acc. to IEC 60754-1 (FRNC types)
Burning behavior:	PVC CMG: acc. IEC 60332-3-24(Cat.C), FT 4 \| PUR: acc. IEC 60332-1-2 \| PUR CMX: acc. IEC 60332-1-2, VW-1
Torsion:	TORSION: ± 180°/m
Approvals:	See table right side
Speed:	Self-supporting: 4 m/s
Acceleration:	Max. 5 m/s² \| TORSION: max. 10 m/s²
Bending cycles:	PUR: up to 7,5 Mio. PVC: up to 5 Mio.

PROFIBUS DP / FMS / FIP 150 Ohm - HF