PROFIBUS DP / FMS / FIP 150 Ohm - HF | JOB_T2003650 | JOB_T2003650
Icon static Icon flexible Icon high flexible Icon drag chain Icon robotic torsion Icon festoon
BUS | FIELDBUS cables for industrial & process automation

PROFIBUS DP / FMS / FIP 150 Ohm - HF

03.10.01.02

|

Use of Cable

as fieldbus cable for PROFIBUS (Process Field BUS) systems, for high flexible applications (e.g. power chains, gantry robots, pick&place units, conveyors, machine tools, automated production systems, etc.)

These cables are suitable for PROFIBUS DP (Decentralized Peripherals) and PROFIBUS FMS (Fieldbus Message Specification) and also for FIP (Factory Instrumentation Protocol) applications.
Standard acc. to Profibus-Spec.: EN61158 & EN61784 (DIN19245 T3 & EN50170)

Product variants
Icon einsatzort indoor Icon einsatzort outdoor
Icon abschirmung Icon merkmale uv resistent Icon merkmale kein feuer Icon merkmale oelresistent Icon merkmale halogenfrei
Icon standards ce geschuetzt Icon standards ul csa
Product information "PROFIBUS DP / FMS / FIP 150 Ohm - HF"
Special features
  • low adhesion
  • largely resistant to grease, coolant fluids and lubricants
  • oil-resistant: PUR & PVC acc.to DIN EN 60811-2-1 (PVC only mineral oil)
  • UV-resistant
  • optimized EMC compliant shielding
  • max. cable lengths for a bus segment acc.to PI at stated transmission rate:
      PROFIBUS DP: 93,75kbit/s-max.1,2km | 187,5kbit/s-max.1km | 0,5Mbit/s-max.400m
                                 1,5 Mbit/s-max.200m | 12,0 Mbit/s-max.100m
      FIP                   : 2,5 Mbit/s-max. 200m

 

Remarks
  • conform to RoHS // conform to DESINA (violet)
  • LABS-/silicone-free (during production)
  • conform to 2014/35/EU-Guideline ("Low-Voltage Directive") CE
  • FRNC: Flame Retardant Non Corrosive, halogen free
  • FC-Type = 'fast-connect' construction // PI = Profibus & Profinet International
Conductor material: Bare copper strand
Conductor class: Ø 0,64L & 0,34 mm²: 19-wired; 1,0 mm²: fine wired acc. to IEC 60228 cl. 6
Core insulation: BUS: foamed PE/PP; supply cores: Polyolefin
Core identification: BUS: gn, rd; supply cores: bk, bu, gnye (1,0mm²) | bk with numerals (1,5mm²)
Stranding: BUScores stranded to a pair
Shield: Alu-lam. polyester foil, metal side outside, coverage 100% under copper braid tinned
Overall stranding: HYBRID: screened BUSelem. a. supply cores stranded
Outer sheath: PVC resp. PUR
Outer sheath construction: Violet RAL 4001 (VT) or petrol (PT)
Rated voltage: BUScores: 250 V (not for high voltage purposes); supply cores: 500 V
Loop resistance: Max. 133,0 Ω/km-0,64L & 0,8L, max. 39,0 Ω/km-1 mm², max. 26,6 Ω/km-1,5 mm²
Capacity: Nom. 30 nF/km
Characteristic impedance: 150 +/- 15 Ω
Min. bending radius fixed: 5 x d
Min. bending radius moved: 7,5 x d < 3mTL* | 15 x d ≥ 3mTL*, FESTOON: 10 x d
Operat. temp. fixed min/max: -40 °C / +80 °C
Operat. temp. moved min/max: PVC: -10 °C / +70 °C; PUR: -30 °C/ +70 °C
Halogen free: Acc. to IEC 60754-1 (FRNC types)
Burning behavior: PVC CMG: acc. IEC 60332-3-24(Cat.C), FT 4 | PUR: acc. IEC 60332-1-2 | PUR CMX: acc. IEC 60332-1-2, VW-1
Torsion: TORSION: ± 180°/m
Approvals: See table right side
Speed: Self-supporting: 4 m/s
Acceleration: Max. 5 m/s² | TORSION: max. 10 m/s²
Bending cycles: PUR: up to 7,5 Mio. PVC: up to 5 Mio.
ASi-BUS Aktor Sensor Interface 03.10.06.01
BUS | FIELDBUS cables for industrial & process automation
for fixed installation & limited flexible applications, UL/CSA
Item count 10
PROFIBUS DP / FMS / FIP 150 Ohm 03.10.01.01
BUS | FIELDBUS cables for industrial & process automation
fixed installation & limited flexible applications, UL/CSA, different CPR versions available
Item count 11
MULTIBUS & INTERBUS 100 - 120 Ohm - HF 03.10.02.02
BUS | FIELDBUS cables for industrial & process automation
for high flexible applications (drag chain) UL/CSA
Item count 7
DeviceNet 120 Ohm 03.10.04.01
BUS | FIELDBUS cables for industrial & process automation
for fixed installation & limited flexible applications, UL/CSA
Item count 4