Halogen-free lift cables

LIFTTEC® multiCAT.7 - H-LC

06.06.05.01

|

Use of Cable

Flat, flexible travelling Ethernet cable for networking purposes according to Cat.7 speci-fications in passenger and goods lifts (elevators).

Standard acc. Industrial Ethernet Spec. & according the requirements for industrial se-condary and tertiary cabling: EN 50173, ISO/IEC 11801, ISO/IEC 24702, TIA/EIA 568, TSB36, EN 50288, IEC 61156-5/-6, IEEE 802.3af.

Product variants

JOB_T3001838

Product information "LIFTTEC® multiCAT.7 - H-LC"

Special features

low adhesion
largely resistant to grease, coolant fluids and lubricants
oil-resistant: acc. to IEC 60811-404
optimized EMC compliant shielding
low adhesionlow attenuation
high crosstalk attenuation
4 pairs: 10Gbit/s (Cat.7) for Industrial Ethernet
HF-characteristics Cat.7 acc.to IEC 61156-6 (7-wired)
Ripcords for easy removing sheath material

Remarks

Conform to RoHS // LABS-/silicone-free (during production)
Conform to 2014/35/EU-Guideline ("Low-Voltage Directive") CE
FRNC: Flame Retardant, Non Corrosive
7-wired: for patch cable applications (max 60m.)
Available accessories can be found under the section 15.35.XX

Conductor material:	Bare copper strand
Conductor class:	7-wired AWG 26/7 (0,14mm²)
Core insulation:	PE
Core identification:	Whbu-bu, whog-og, whgn-gn, whbn-bn
Stranding:	Cores twisted to pairs
Shield:	S/FTP: copper braid tinned as overall shield & alu-lamin. polyester foil as pair shield
Supporting element:	2 steel supporting elements in the outer sheath
Inner sheath material:	Halogen-free compound, grey
Outer sheath:	Halogen-free compound, with ripcords
Outer sheath construction:	Surface with knurling
Sheath colour:	Black, RAL 9005
Rated voltage:	30 V
Testing voltage:	1 kV
Conductor resistance:	Max. 143 Ω / km
Loop resistance:	292 Ω / km
Insulation resistance:	≥ 2.000 MΩ x km
Capacity:	Nom. 43 nF / km
Characteristic impedance:	100 ± 5 Ω (100 MHz)
Transfer rate:	Cat.7 acc. to. DIN EN 50288-4-2
Attenuation:	Nach IEC 61156-6
Signal propagation delay:	Approx. 4,6 ns / m
Min. bending radius fixed:	8 x d
Min. bending radius moved:	10 x d
Operat. temp. fixed min/max:	-15 °C / +70 °C
Operat. temp. moved min/max:	-15 °C / +60 °C
Halogen free:	Acc. to IEC 60754-2
Burning behavior:	Acc. to IEC 60332-1-2
Resistant to oil:	Acc. to IEC 60811-404
Suspension height:	Max. 100 m
Standard:	Based on EN 50214
Speed:	Max. 4,0 m/s